6 Signs That Suggest You Need a New Refrigerator

Refrigerators are built to last, but that does not mean they will last forever. At some point in your lifetime, you will likely be faced with the responsibility of replacing an old or defective refrigerator with a new one. In fact, this impending task may come sooner than later if your refrigerator is already shows the tell-tale signs.

Continue reading to learn the top 6 most evident signs that tell you it’s time to buy a new fridge, as well as, how to make the most out of your old one.

Indianapolis Appliance Recycling

We Buy Broken Appliances! 1-888-586-5322

If your refrigerator is showing just one or two of the following signs, it is recommended to have it inspected by an appliance repair company to be sure replacement is necessary. You might just need a part replaced, or a minor repair. On the other hand, if your refrigerator is showing more than a couple signs, it is likely that replacement is the best option.

It’s Noisy

A loud refrigerator can be an indication that the motor is constantly running. If this is the case, it could be that the motor is defective. It may be trying too hard, or having trouble operating. Unplug the refrigerator and then plug it back in to see if the noise stops. If it doesn’t, your fridge is failing.

It Sweats

If your refrigerator develops a lot of condensation inside or outside, it could be the result of a defective cooling system. However, it could also just be caused by a faulty door seal. Check to see if the edge of the door is intact, and replace it if it seems warped or dislodged. If this is not the issue, then it could be a broken cooling system.

The Back is Hot

If you touch the back of the refrigerator and it feels hot, not warm but hot, then it could be a motor malfunction. The refrigerator motor is located in the back, and when it is having trouble operating, it overcompensates, which causes the exterior of the fridge to feel hot. Keep in mind that a broken refrigerator motor is a costly part, which means that you are probably better off buying a new one in this case.

Food Expires Faster

If you notice that produce is wilting faster, contained food is spoiling too soon, and your beverages are not cold enough, your refrigerator could have an issue with its temperature control system, or its power capacity. This sign is typical of older model refrigerators.

Freezer is Frosty

A little frost accumulation in the freezer is perfectly normal, but thick frost buildup is not a good sign. It implies that there could be a problem with the refrigerator’s entire control system. Like spoiled food, this sign is often found in old refrigerators.

It’s Old

If your refrigerator is older than 10 years, and it is showing even one of the above signs, it is the perfect time to replace it with a newer model. Not only with this improve the quality of your food and beverages, it can also help cut down on energy costs, and save you money in the long haul. There are several innovative technologies in modern refrigerators that make them more energy efficient, which lowers your monthly utility costs.

What To Do With Your Old or Broken Refrigerator

Your broken refrigerator is still valuable…to scrap metal buyers!

Garden City Iron and Metal 1-888-586-5322

Garden City Iron and Metal 1-888-586-5322

Call Garden City Iron & Metal at 1-888-586-5322 to sell an old appliance in Central and Southern Indiana. We pay cash on the spot for all appliances and metal commodities, including refrigerators, kitchen hood systems, ovens, stoves, dishwashers, washing machines, dryers, and much more! Collect all the scrap metal you can, and then sell it to us for the highest profit in town! Request a free estimate or information, today.

Popular Grades of Aluminum Metal and Their Current Market Values

Aluminum Metal Recycling

Aluminum Metal Recycling 1-888-586-5322

Metal recycling is one of the most impactful and important enterprises in today’s society. You too can contribute to this wonderful initiative by recycling at home or in the office. One of the most frequently recycled metals is aluminum, partly because it is so wide-spread, but also because it is light-weight and easy to transport. Even better, aluminum does well in terms of economics, maintaining a reasonable yet profitable market value.

If you have an interest in recycling aluminum metal, start by gathering all of the aluminum you can find in and around your home and office. Keep in mind, there are several different types of aluminum, all of which retain different values and properties. To better sort your metal and understand its worth, it is helpful to learn about the various grades of aluminum. This will also help you seek out different items that you can recycle!

Deciphering Aluminum Metals

Since it is highly versatile, aluminum can be combined with numerous other metals and alloys to produce different qualities and attributes, depending on the intended application. There are several different grades of aluminum out there, but the most popular ones to recycle are listed below.

Pure Aluminum – Also known as Alloy 1100, this grade is known for its flexibility and softness. It is often used to produce items that involve complex shaping, bending, and forming. Furthermore, it is sought out for its high ductility, resistance to corrosion, and its brilliant color.

Alloy 2011 – This alloy grade is also known as “free machining alloy (FMA)”, and commonly used for machinery applications. This is because Alloy 2011 retains high mechanical strength. It is good for manufacturing intricate and complex machine parts.

Alloy 2014 – Just like Alloy 2011, Alloy 2014 retains high mechanical strength and machining abilities. Its strength coupled with its resistance to corrosion makes it a popular choice for aerospace structural applications.

Alloy 2024 – Because of its incredible strength and fatigue resistance, this alloy is one of the most commonly used. When a project requires good weight to strength ratio, Alloy 2024 is usually the best match.

Alloy 3003 – Alloy 2024 may be one of the most commonly used grades of aluminum, but Alloy 3003 is the most commonly used grade. It retains a nominal amount of magnesium, which makes it up to 20% stronger than pure grade and 2011.

Alloy 5052 – Just like pure grade aluminum, Alloy 5052 is non-heat treatable. But in comparison, it is stronger and more durable. It also has an adequate resistance to salt water, making it a staple in commercial and industrial marine applications.

Alloy 6061 – Also non-heat treatable, Alloy 6061 is highly versatile; in fact, it is the most versatile out of all the non-heat treatable grades. It is also highly resistant to corrosion and retains terrific mechanical properties. In the annealed state, it is extremely malleable and can be welded using several different techniques.

Alloy 6063 – Known as an architectural alloy since it is retains high tensile properties and excellent finishing characteristics, this corrosion-resistant alloy is popular for interior and exterior architectural applications, such as architectural trim and even anodizing.

Alloy 7075 – Alloy 7075 is one of the highest strength aluminum alloys on the market. It is great for projects that require great weight to strength ratios. And just like Alloy 6061, it is better molded and shaped in an annealed condition, and responds well to heart treatments like spot and flash welding.

Current Market Value as of Today:
$0.88 per Pound
SOURCE

Where to Recycle Scrap Aluminum for Cash

Garden City Iron and Metal 1-888-586-5322

Garden City Iron and Metal 1-888-586-5322

Call Garden City Iron & Metal at 1-888-586-5322 to recycle aluminum in Indianapolis, or in Central and Southern Indiana. We pay cash on the spot for both ferrous and non-ferrous metals, as well as, junk cars, automotive parts, appliances, construction equipment, motorized farming equipment, and much more! Get rid of your junk and make some fast cash at the same time.