Facts About Steel Pickling

A common, unusable substance that can form on hot-worked steel is known as iron oxide. Iron oxide formation results in a layer of flaky scale that significantly reduces the quality and performance of the metal. In addition to iron oxide scale, several other impurities are also known to degrade hot-worked or hot rolled steel materials, such as rust and similar iron oxide allotropes. To combat iron scale formation and impurity contamination on steel, a special metal dipping process was developed known as steel pickling.

Continue reading to learn some important facts about steel pickling, including how to make the most out of damaged steel materials in Central Indiana.

Scrap Steel Recycling Indianapolis IN 1-888-586-5322
Scrap Steel Recycling Indianapolis IN 1-888-586-5322

What is Steel Pickling?

Steel pickling is a metal decontamination process involving acid bathing science. Hot worked steel is dipped into a substance known as pickle liquor, hence the name, to remove all surface impurities that can increase the rate of iron oxide scale, rust, and similar metal corrosion. Pickle liquor can be either sulfuric acid or hydrochloric acid. Both substances render equivalent efficacy.

Conventional hot worked steel can be decontaminated with so for occur hydrochloric acid bathing, but any steel material with the carbon content higher than 6% will require an additional dipping into an acid bath of nitric, phosphoric, or hydrofluoric acid. Following the acid bath process, treated steel is rinsed clean with water and ready for further treating. Typically, cold working is the next step following steel pickling.

Smooth Clean Surface (SPS) and Flame Cleaning

Smooth clean surface (SPS) is a common alternative to steel pickling that remove surface impurities by pushing sheet-metal through a series of rollers and mechanical abrasives. It is often chosen in place of steel pickling when dipping is structurally incompatible, or the particular type of metal or impending application is vulnerable to acid bathing. Another common alternative to steel pickling is known as flame cleaning. This steel decontamination process uses an oxyacetylene flame that essentially burns off all surface impurities.

Responsible Scrap Disposal in Indiana

Regardless of your metal applications, it is important to responsibly dispose of all of your scrap steel in order to preserve our natural resources and reduce the need to mine for new orders. Contact your trusted Indianapolis metal recycling center to earn instant cash for all of your scrap steel and metal commodities. Be sure to choose a recycling company that adheres to all local and state regulations, as well as all EPA guidelines for responsible scrap disposal.

Are you ready to recycle your scrap steel for cash on the spot in Indiana? Contact Garden City Iron & Metal at 1-888-586-5322 to speak with a professional scrap metal buyer in Indianapolis, Indiana. We accept all scrap metal and metal commodities, including cars, construction equipment, and auto parts.

Related Posts:

The Basic Types of Steel Metal
This Fact About Steel Will Shock You
What You Can Do With Surplus Steel

Garden City Iron and Metal 1-888-586-5322
Garden City Iron and Metal 1-888-586-5322

What You Can Do With Surplus Steel

Whether you own a construction company or teach a metal fabrication class, having a surplus of leftover steel from a recent project can benefit you greatly in many ways. Continue reading to learn what you can do with surplus steel, including one way that will make you an instant cash profit right here in central Indiana.

Steel Recycling Center Indianapolis IN 1-888-586-5322
Steel Recycling Center Indianapolis IN 1-888-586-5322

The Advantages of Scrap Steel

One the best attributes of scrap steel is that it is 100% recyclable and can be repurposed into a countless number of commodities applicable in a wide range of industries. From construction and farming to automotive manufacturing, food canning, and much more, steel plays a vital role in our nation’s economy, as well as the global economy.

So, when you have leftover steel that seems to serve no purpose, look to these ideas to make the most out of your scrap metal:

Artwork

Do you have an artist in the family? Scrap metal, especially steel piping and sheet metal, can be used to create magnificent art projects and artworks. From sculptures and statues to abstract figures and more, steel makes the perfect material for molding and welding art of all forms.

Structural Repairs

If you consider yourself a pretty capable handyman, you can use your left over scrap steel to provide certain reinforcements and repairs around your home or business. You can use scrap steel to build handrails and banisters, or to reinforce patios and decking.

Shed Construction

If you are preparing to build a new shed or storage utility barn on your property, your leftover steel scrap can be put to good use. Talk to your general contractor about incorporating your left over scrap in order to reduce the cost of materials.

Steel Recycling

The best thing you could possibly do with your surplus steel is to sell it to a local metal recycling center for cash on the spot. Not all metal recycling centers in Indiana pay cash on the spot, or at all for that matter, so it’s important for you to do your research. Supporting steel recycling is an important initiative that can make you feel good and fatten up your wallet!

Are you looking for a trusted Indiana metal recycling company that will pay you top dollar for your steel? Contact Garden City Iron & Metal at 1-888-586-5322 to speak with a professional scrap metal buyer in Indianapolis, Indiana. We accept all scrap metal and metal commodities, including scrap steel and construction scrap.

Related Posts:

Why You Should Recycle Steel Automotive Parts
This Fact About Steel Will Shock You
The Basic Types of Steel Metal

Garden City Iron and Metal 1-888-586-5322
Garden City Iron and Metal 1-888-586-5322

Why You Should Recycle Steel Automotive Parts

Recycling junk cars has a huge impact on our environment, economy, and more; an impact that is entirely positive. There are many benefits of junk car recycling, most of which involve steel. Continue reading to learn why it is important to recycle the steel in junk cars, and how you can personally contribute to this wonderful initiative.

Indianapolis Scrap Steel Recycling 1-888-586-5322
Indianapolis Scrap Steel Recycling 1-888-586-5322

Most Vehicles Contain More Steel Than Any Other Metal

Most vehicles are manufactured with steel because it is a highly durable, strong, and dependable metal. Not only can it protect drivers and passengers, but it can also be recycled and repurposed over and over again. In fact, most steel is made from existing steel materials, which does wonders to preserve our natural resources, conserve energy, and reduce harmful emissions produced by metal refining factories. According to the Steel Recycling Institute (SRI), “recycling a single ton conserves 2500 pounds of iron ore, 1400 pounds of coal, and 120 pounds of limestone.”

Vehicles, on average, are 60% steel and iron. The shell alone is 25% of the total amount of steel in a car or truck, on average. This includes the quarter panels, trunk, hood, and doors. Additionally, internal parts and metal components are recycled for their steel, such as automotive parts, gaskets, circuit boards, and more.

Tons of Automotive Steel are Recycled Every Year

Motorized vehicles are among the most frequently recycled consumer product in the country. Regardless of who owned them or what happened to them, virtually all cars end up in the recycling process. According to the Steel Recycling Institute (SRI), more than 14 million tons of steel from cars are recycled each year. This can actually be argued as a 100% recycling rate among vehicles no longer suited for the road!

The Auto Salvaging Process

The junk car recycling process, although not too complicated, requires a fleet of highly-specialized equipment and technology. Most metal reprocessing centers will start by draining the vehicle of any remaining fluids to stay within environmentally responsible recycling practices. These fluids include transmission fluid, brake fluid, power steering fluid, windshield wiper fluid, radiator fluid, battery fluid, and motor oil. Next, they will begin to dismantle the vehicle of all its reusable parts, like wheels, tires, headlights, doors, windows, fenders, bumpers, trunk lids, stereos, and any operational or repairable auto parts.

After a vehicle is finished with the draining and dismantling process, all that’s left are scattered hulks. This is usually shredded in an industrial metal shredder, which is an enormous and innovative machine that can shred large hulks down to fist-sized pieces in less than 45 seconds. These pieces are a compilation of steel, non-steel metals, and fluff (non-recyclable rubber, plastic, glass, etc.). A large magnetic sorter is used to separate the steel and iron pieces from the rest of the shredding material, which are then shipped all across the country to various metal buyers, reprocessed, and steel mills.

Call Garden City Iron & Metal at 1-888-586-5322 to get started with your contribution to steel recycling initiative. Recycle scrap metal and junk metal commodities in Central and Southern Indiana for cash on the spot!

You Might Also Like:

The Basic Types of Steel Metal
Most Valuable Metals in Junk Cars
What is This Junk Car Worth?

Garden City Iron and Metal 1-888-586-5322
Garden City Iron and Metal 1-888-586-5322

This Fact About Steel Will Shock You

Steel is one of the most abundant and applied metals in the world. Not only does it retain incredible properties, such as high tensile strength and resistance to corrosion, steel’s formability is infinite. But there is one very unique quality of steel metal that most of us never knew, and it has to do with recycling. You see, all steel bought and sold in the United States contains recycled steel material.  All of it. Intrigued?

Continue reading to learn even more interesting facts about steel and metal recycling, including how to make fast cash by selling scrap metal in Indiana.

Indianapolis Scrap Steel Buyers
Indianapolis Scrap Steel Buyers 1-888-586-53221-888-586-5322

Facts About Steel Recycling

When you look around, you can likely see steel everywhere, in every direction. Steel is used in various industries across the land, including building and construction, medical, food and beverage, plumbing, automotive, aviation, fire protection, and much more. Your home and office are built with steel, and the appliances and other commodities within also contain steel. The best thing about steel, or any metal for that matter, is that it is 100% recyclable, and can be recycled over and over again without losing any calculable quality. Millions of tons of steel products and materials are recycled into new steel products each year!

The Benefits of Recycling Steel

One of the most important and primary parts of steel manufacturing is steel recycling. There are several benefits of recycling scrap metal. Not only does recycling metal help preserve our planet’s natural resources and reduce our need to mine for new ores, it decreases harmful factory emissions generated while producing new steel, which also positively impacts our environment. Virtually all of the steel used to manufacture new products and materials contain post-consumer steel product, better known as recycled steel. In fact, most states have a mandate known as a “buy recycled” mandate, which requires consumers to purchase recycled steel products when procuring material for large-scale production.

Where to Recycle Scrap Steel for Cash in Indianapolis, Indiana

Call Garden City Iron & Metal at 1-888-586-5322 for superior scrap metal recycling services in Indianapolis, or in Central and Southern Indiana. We pay cash on the spot for all scrap metal, including steel and iron. We also buy junk cars, car parts, appliances, construction equipment, motorized farming equipment, and much more! Get rid of your junk and make some fast cash at the same time.

Garden City Iron and Metal 1-888-586-5322
Garden City Iron and Metal 1-888-586-5322